How to Replace Radiator 2012-2015 Honda Civic 1.8L I4

Buy Now!
New Radiator from 1AAuto.com

This video shows you how to install a new TRQ radiator in your 2012-2015 Honda Civic 1.8L I4. Overheating is a sure sign there’s something wrong with your cooling system. A leak, rust, or obstructions are all cases that may require a radiator replacement. Install a new TRQ radiator that’s engineered to fit your vehicle.

Estimated installation time for a professional technician is approximately: 3 hours 0 minutes

This repair was done on a 2013 Honda Civic EX 1.8L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Honda Civic
2013 Honda Civic
2014 Honda Civic
2015 Honda Civic

Tools you will need:
• 10mm Wrench
• 10mm Socket
• 17mm Socket
• Trim Tool Set
• Hose Clamp Pliers
• Needle nose pliers
• Needle nose pliers
• Ratchet
• Gloves
• Safety Glasses
• 5.5mm Hex Wrench
• Drain Pan
• Pick

Subscribe:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.